Construct UART Data Frame with Parity Bit

Code

#include <stdio.h>
#include <stdint.h>

typedef struct {
    uint8_t parity_enable : 1;
    uint8_t parity_type   : 1;
    uint8_t reserved      : 6;
} UART_Control;

uint8_t create_uart_frame(uint8_t data, UART_Control *ctrl) {
 if(ctrl->parity_enable==0){
        return data;
    }
    else{
        uint8_t count=0,mdata=data;
        while(mdata!=0){
            count=count+1;
            mdata&=mdata-1;
        }
        if(ctrl->parity_type==0){
            if(count%2!=0){
                data=data|(1<<7);
            }
        }
        else if(ctrl->parity_type==1){
            if(count%2==0){
                data=data|(1<<7);
            }
        }
        return data;
}
}

int main() {
    uint8_t data;
    scanf("%hhu", &data);  // 7-bit input

    uint8_t parity_enable, parity_type;
    scanf("%hhu %hhu", &parity_enable, &parity_type);

    UART_Control ctrl;
    ctrl.parity_enable = parity_enable;
    ctrl.parity_type = parity_type;

    uint8_t frame = create_uart_frame(data, &ctrl);
    printf("frame = 0x%02X", frame);

    return 0;
}

Solving Approach