Construct UART Data Frame with Parity Bit

Code

#include <stdio.h>
#include <stdint.h>

typedef struct {
    uint8_t parity_enable : 1;
    uint8_t parity_type   : 1;
    uint8_t reserved      : 6;
} UART_Control;

uint8_t create_uart_frame(uint8_t data, UART_Control *ctrl) {
    // Your logic here  
    uint8_t frame = data;
    if(ctrl->parity_enable == 0) {
        return frame;
    } 
    uint8_t count = 0;
    uint8_t mask = data;
    for(uint8_t i =0;i<7;i++){
        if(mask & 0x01) count++;
        mask = mask >> 1;
    }

    if (ctrl->parity_type == 1) {
        if (count % 2 == 0) {
            frame |= (1 << 7);   
        }
    }
   
    else {
        if (count % 2 == 1) {
          frame|= (1 << 7);
        }
    }

    return frame;

}
   

int main() {
    uint8_t data;
    scanf("%hhu", &data);  // 7-bit input

    uint8_t parity_enable, parity_type;
    scanf("%hhu %hhu", &parity_enable, &parity_type);

    UART_Control ctrl;
    ctrl.parity_enable = parity_enable;
    ctrl.parity_type = parity_type;

    uint8_t frame = create_uart_frame(data, &ctrl);
    printf("frame = 0x%02X", frame);

    return 0;
}

Solving Approach