Decode Status Register into Human-Readable Flags

#include <stdio.h>
#include <stdint.h>

void decode_status(uint8_t status_reg) {
    // Check each bit from LSB (bit 0) to MSB (bit 7)
    if (status_reg & (1 << 0)) {
        printf("Power On\n");
    }
    if (status_reg & (1 << 1)) {
        printf("Error\n");
    }
    if (status_reg & (1 << 2)) {
        printf("Tx Ready\n");
    }
    if (status_reg & (1 << 3)) {
        printf("Rx Ready\n");
    }
    if (status_reg & (1 << 4)) {
        printf("Overheat\n");
    }
    if (status_reg & (1 << 5)) {
        printf("Undervoltage\n");
    }
    if (status_reg & (1 << 6)) {
        printf("Timeout\n");
    }
    // Bit 7 is Reserved - ignore or optionally print warning
    if (status_reg & (1 << 7)) {
        // Reserved bit - could print warning or ignore
        printf("Reserved\n");
    }
}

int main() {
    uint8_t reg;
    scanf("%hhu", &reg);
    decode_status(reg);
    return 0;
}

Solving Approach