Macro-Based Register Config Helper

Code

#include <stdio.h>
#include <stdint.h>
#define enable_pin(reg,enable) (reg|(enable<<0))
#define mode_pin(reg,mode) (reg|(mode<<1))
#define speed_pin(reg,speed) (reg|(speed<<3))

uint16_t build_register(uint8_t enable, uint8_t mode, uint8_t speed) {
    // Use macros to set fields
        uint16_t reg;
            reg=enable_pin(reg,enable);
                reg=mode_pin(reg,mode);
                    reg=speed_pin(reg,speed);
                        return reg;
                        }
int main() {
    uint8_t enable, mode, speed;
    scanf("%hhu %hhu %hhu", &enable, &mode, &speed);

    uint16_t reg = build_register(enable, mode, speed);
    printf("%u", reg);
    return 0;
}

Solving Approach