Macro-Based Register Config Helper

Code

#include <stdio.h>
#include <stdint.h>

// Define macros here
#define ENABLE(reg,data) reg &= ~(0b1) ; reg |= data;
#define MODE(reg,data)  reg &= ~(0b11<<1) ; reg |= data<<1;
#define SPEED(reg,data) reg &= ~(0b11<<3) ; reg |= data<<3;
#define RESERVED(reg,data) reg &= ~(0b11<<6) ; reg |= data<<6; 

uint16_t build_register(uint8_t enable, uint8_t mode, uint8_t speed) {
    // Use macros to set fields
    uint16_t reg = 0; 
    ENABLE(reg,enable);
    MODE(reg,mode);
    SPEED(reg,speed);

    return reg;
}

int main() {
    uint8_t enable, mode, speed;
    scanf("%hhu %hhu %hhu", &enable, &mode, &speed);

    uint16_t reg = build_register(enable, mode, speed);
    printf("%u", reg);
    return 0;
}

Solving Approach