46. Reset Tactile Switch Selection
Back To All Submissions
Previous Submission
Next Submission
PTS645SL43-2 LFS
| DigiKey Part No | CKN9098-ND |
| Mfr Part No | PTS645SL43-2 LFS |
| Manufacturer | C&K |
SWITCH TACTILE SPST-NO 0.05A 12V
Tactile Switch SPST-NO Top Actuated Through Hole
Powered by
EW
Response By EW AI
✅ Circuit: SPST-NO matches the required normally open reset switch.
✅ Switch Function: Off-Mom matches the required momentary action.
✅ Mounting Type: Through Hole matches the PCB mounting requirement.
✅ Actuator Orientation: Top Actuated matches the required button style.
✅ Termination Style: PC Pin matches the required through-hole pin termination.
✅ Outline: 6.00mm x 6.00mm exactly matches the required footprint.
✅ Actuator Height off PCB, Vertical: 4.30mm is within the required 4.3mm to 5.5mm range.
✅ Operating Force: 130gf is within the required 120gf to 260gf range, suitable for easy pressing during testing.
✅ Operating Temperature: -40°C to 85°C matches the required temperature range.
All required specifications are satisfied, so this component is approved for the microcontroller RESET button application.
✅ Switch Function: Off-Mom matches the required momentary action.
✅ Mounting Type: Through Hole matches the PCB mounting requirement.
✅ Actuator Orientation: Top Actuated matches the required button style.
✅ Termination Style: PC Pin matches the required through-hole pin termination.
✅ Outline: 6.00mm x 6.00mm exactly matches the required footprint.
✅ Actuator Height off PCB, Vertical: 4.30mm is within the required 4.3mm to 5.5mm range.
✅ Operating Force: 130gf is within the required 120gf to 260gf range, suitable for easy pressing during testing.
✅ Operating Temperature: -40°C to 85°C matches the required temperature range.
All required specifications are satisfied, so this component is approved for the microcontroller RESET button application.
Was this helpful?
Upvote
Downvote