Serialized Data Buffer

Code

#include <stdio.h>
#include <stdint.h>

void build_packet(uint8_t command, uint16_t value, uint8_t status, uint32_t checksum) {
    uint8_t buffer[10];

    buffer[0] = 0xA5;                        // Start byte
    buffer[1] = command;                     // Command
    buffer[2] = (uint8_t)(value & 0xFF);     // Value low byte
    buffer[3] = (uint8_t)((value >> 8) & 0xFF); // Value high byte
    buffer[4] = status;                      // Status byte
    buffer[5] = (uint8_t)(checksum & 0xFF);
    buffer[6] = (uint8_t)((checksum >> 8) & 0xFF);
    buffer[7] = (uint8_t)((checksum >> 16) & 0xFF);
    buffer[8] = (uint8_t)((checksum >> 24) & 0xFF);
    buffer[9] = 0x5A;                        // Stop byte

    for (int i = 0; i < 10; i++)
    {
        printf("%d ",buffer[i]);
    }




    // Your logic to fill buffer
    // Then print buffer
}

int main() {
    uint8_t cmd, status;
    uint16_t val;
    uint32_t crc;

    scanf("%hhu %hu %hhu %u", &cmd, &val, &status, &crc);
    build_packet(cmd, val, status, crc);
    return 0;
}

Solving Approach