Set Baud Rate Field in Control Register

Code

#include <stdio.h>
#include <stdint.h>

uint32_t set_baud_rate(uint32_t reg, uint8_t baud) {
    // Your code here
    uint32_t uart_baud_rate_clr_mask = (0xF << 8);
    uint32_t uart_baud_value = ((uint32_t)baud << 8);

    reg &= ~uart_baud_rate_clr_mask;
    reg |= uart_baud_value;
    return reg;
}

int main() {
    uint32_t reg;
    uint8_t baud;
    scanf("%u %hhu", &reg, &baud);
    printf("%u", set_baud_rate(reg, baud));
    return 0;
}

Solving Approach