Set or Clear a Specific Bit in a Register

Code

#include <stdio.h>

unsigned char modifyBit(unsigned char reg, int pos, int mode) {
    // Taken care by the input so ignoring below
    // pos should be valid
    // Mode should be valid
    // register input shall be valid

    return (mode == 1) ? // Check mode
            (reg | (1 << pos)) : // Set 
            (reg & ~(1 << pos));  // Clear
}

int main() {
    unsigned char reg;
    int pos, mode;
    scanf("%hhu %d %d", &reg, &pos, &mode);
    printf("%d", modifyBit(reg, pos, mode));
    return 0;
}

Solving Approach