Set or Clear a Specific Bit in a Register

Code

#include <stdio.h>

unsigned char modifyBit(unsigned char reg, int pos, int mode) {
    // Write your code here
    if(mode == 1)
    {
        reg |= (1<<pos);
    }
    else
    {
        reg &= ~(1<<pos);
    }
    return reg;
}

int main() {
    unsigned char reg;
    int pos, mode;
    scanf("%hhu %d %d", &reg, &pos, &mode);
    printf("%d", modifyBit(reg, pos, mode));
    return 0;
}

Solving Approach

Based on mode first select mode is set to 1 that means u need to set a bit based on the position. If the mode is set to 0 that means you need to clear the data