56. Solenoid Valve Relay Selection
Back To All Submissions
Previous Submission
Next Submission
G5NB-1A4-EL-HA DC12
| DigiKey Part No | Z4379-ND |
| Mfr Part No | G5NB-1A4-EL-HA DC12 |
| Manufacturer | Omron Electronics Inc-EMC Div |
RELAY GEN PURPOSE SPST 7A 12V
General Purpose Relay SPST-NO (1 Form A) 12VDC Coil Through Hole
Powered by
EW
Response By EW AI
✅ Relay Type: General Purpose, matches requirement.
✅ Mounting Type: Through Hole, matches requirement.
✅ Coil Voltage: 12VDC, matches requirement.
✅ Contact Form: SPST-NO (1 Form A), acceptable because the requirement allows SPST-NO or SPDT.
✅ Contact Rating: 7A, exceeds the minimum required 3A and provides margin over the 1.2A solenoid load.
✅ Switching Voltage: Rated up to 30VDC max, which is suitable for switching a 24VDC solenoid valve.
✅ Coil Type: Non Latching, matches requirement.
✅ Termination Style: PC Pin, matches requirement.
✅ Operating Temperature: -40°C to 85°C, matches requirement.
✅ Approval Agency: CSA, UR, VDE listed; UR is acceptable as cURus or equivalent approval agency requirement.
All listed requirements are satisfied, so this relay is approved for the stated 24V DC solenoid valve switching application.
✅ Mounting Type: Through Hole, matches requirement.
✅ Coil Voltage: 12VDC, matches requirement.
✅ Contact Form: SPST-NO (1 Form A), acceptable because the requirement allows SPST-NO or SPDT.
✅ Contact Rating: 7A, exceeds the minimum required 3A and provides margin over the 1.2A solenoid load.
✅ Switching Voltage: Rated up to 30VDC max, which is suitable for switching a 24VDC solenoid valve.
✅ Coil Type: Non Latching, matches requirement.
✅ Termination Style: PC Pin, matches requirement.
✅ Operating Temperature: -40°C to 85°C, matches requirement.
✅ Approval Agency: CSA, UR, VDE listed; UR is acceptable as cURus or equivalent approval agency requirement.
All listed requirements are satisfied, so this relay is approved for the stated 24V DC solenoid valve switching application.
Was this helpful?
Upvote
Downvote