64. 24V Input Optocoupler Selection
Back To All Submissions
Previous Submission
Next Submission
LTV-817M
| DigiKey Part No | LTV-817M-ND |
| Mfr Part No | LTV-817M |
| Manufacturer | Lite-On Inc. |
OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Optoisolator Transistor Output 5000Vrms 1 Channel 4-DIP
Powered by
EW
Response By EW AI
✅ Output Type: Transistor, matches the required transistor output optocoupler.
✅ Number of Channels: 1, matches requirement.
✅ Voltage - Isolation: 5000Vrms, exceeds the minimum required 3000Vrms.
✅ Current Transfer Ratio (Min): 50% @ 5mA, meets the minimum CTR requirement per the stated validation note.
✅ Voltage - Output (Max): 35V, exceeds the required minimum of 30V.
✅ Current - Output / Channel: 50mA, exceeds the required minimum of 10mA.
✅ Voltage - Forward (Vf) (Typ): 1.2V, below the maximum allowed 1.5V.
✅ Current - DC Forward (If) (Max): 50mA, meets the required minimum.
✅ Mounting Type: Through Hole, matches requirement.
✅ Package / Case: 4-DIP, matches requirement.
✅ Operating Temperature: -55°C to 110°C, wider than the required -40°C to +85°C.
✅ RoHS Compliance: ROHS3 Compliant, satisfies the RoHS requirement.
All required specifications are satisfied. This component is approved for the stated 24V isolated digital input to 3.3V MCU application.
✅ Number of Channels: 1, matches requirement.
✅ Voltage - Isolation: 5000Vrms, exceeds the minimum required 3000Vrms.
✅ Current Transfer Ratio (Min): 50% @ 5mA, meets the minimum CTR requirement per the stated validation note.
✅ Voltage - Output (Max): 35V, exceeds the required minimum of 30V.
✅ Current - Output / Channel: 50mA, exceeds the required minimum of 10mA.
✅ Voltage - Forward (Vf) (Typ): 1.2V, below the maximum allowed 1.5V.
✅ Current - DC Forward (If) (Max): 50mA, meets the required minimum.
✅ Mounting Type: Through Hole, matches requirement.
✅ Package / Case: 4-DIP, matches requirement.
✅ Operating Temperature: -55°C to 110°C, wider than the required -40°C to +85°C.
✅ RoHS Compliance: ROHS3 Compliant, satisfies the RoHS requirement.
All required specifications are satisfied. This component is approved for the stated 24V isolated digital input to 3.3V MCU application.
Was this helpful?
Upvote
Downvote