54. AC Load Relay Selection
Back To All Submissions
Previous Submission
Next Submission
G5Q-1A-HR-HA-VH DC12
| DigiKey Part No | 39-G5Q-1A-HR-HA-VHDC12-ND |
| Mfr Part No | G5Q-1A-HR-HA-VH DC12 |
| Manufacturer | Omron Electronics Inc-EMC Div |
HIGH INRUSH 10A PCB RELAY
General Purpose Relay SPST-NO (1 Form A) 12VDC Coil Through Hole
Powered by
EW
Response By EW AI
✅ Relay Type: General Purpose, matches the requirement.
✅ Mounting Type: Through Hole, matches the PCB relay requirement.
✅ Coil Voltage: 12VDC, matches exactly.
✅ Contact Form: SPST-NO (1 Form A), acceptable because only normally open switching is needed and SPST-NO is explicitly allowed.
✅ Contact Rating: 10A, exceeds the required minimum of 5A and is suitable for a 2A lamp load.
✅ Switching Voltage: 277VAC max, suitable for switching a 230VAC load.
✅ Coil Type: Non Latching, matches the requirement.
✅ Termination Style: PC Pin, matches the requirement.
✅ Operating Temperature: -40°C to 85°C, matches the required range.
✅ Approval Agency: cURus listed, which satisfies the approval requirement.
All required specifications are satisfied. This relay is approved for the stated 230VAC lamp load switching application.
✅ Mounting Type: Through Hole, matches the PCB relay requirement.
✅ Coil Voltage: 12VDC, matches exactly.
✅ Contact Form: SPST-NO (1 Form A), acceptable because only normally open switching is needed and SPST-NO is explicitly allowed.
✅ Contact Rating: 10A, exceeds the required minimum of 5A and is suitable for a 2A lamp load.
✅ Switching Voltage: 277VAC max, suitable for switching a 230VAC load.
✅ Coil Type: Non Latching, matches the requirement.
✅ Termination Style: PC Pin, matches the requirement.
✅ Operating Temperature: -40°C to 85°C, matches the required range.
✅ Approval Agency: cURus listed, which satisfies the approval requirement.
All required specifications are satisfied. This relay is approved for the stated 230VAC lamp load switching application.
Was this helpful?
Upvote
Downvote