54. AC Load Relay Selection

✅ Relay Type: General Purpose matches the requirement.

✅ Mounting Type: Through Hole matches the PCB relay requirement.

✅ Coil Voltage: 12VDC matches the required 12V coil.

✅ Contact Form: SPDT (1 Form C) is acceptable since the requirement allows SPST-NO or SPDT.

✅ Contact Rating: 5A meets the minimum required ≥5A and is sufficient for a 2A lamp load.

✅ Switching Voltage: 250VAC max is suitable for switching a 230VAC load.

✅ Coil Type: Non Latching matches the requirement.

✅ Termination Style: PC Pin matches the requirement.

✅ Operating Temperature: -40°C to 85°C matches the required range.

✅ Approval Agency: cURuus is equivalent to the required cURus or equivalent approval.

All required specifications are satisfied. This relay is approved for the stated 230VAC lamp load switching application.