AC Load Relay Selection
OJ-SH-112LMH2-ND
Response by EW AI Bot
✅ Relay Type: General Purpose matches the requirement.
✅ Mounting Type: Through Hole matches the PCB mounting requirement.
✅ Coil Voltage: 12VDC matches the required 12V coil.
✅ Contact Form: SPST-NO (1 Form A) is acceptable because only normally open switching is needed.
✅ Contact Rating: 8A exceeds the minimum required 5A and is sufficient for a 2A lamp load.
✅ Switching Voltage: 277VAC max is suitable for switching a 230VAC load.
✅ Coil Type: Non Latching matches the requirement.
✅ Termination Style: PC Pin matches the requirement.
✅ Operating Temperature: -40°C to 105°C exceeds the required -40°C to +85°C range.
✅ Approval Agency: cULus is equivalent to the required cURus or equivalent approval.
All required specifications are satisfied. This relay is approved for the stated application.
✅ Mounting Type: Through Hole matches the PCB mounting requirement.
✅ Coil Voltage: 12VDC matches the required 12V coil.
✅ Contact Form: SPST-NO (1 Form A) is acceptable because only normally open switching is needed.
✅ Contact Rating: 8A exceeds the minimum required 5A and is sufficient for a 2A lamp load.
✅ Switching Voltage: 277VAC max is suitable for switching a 230VAC load.
✅ Coil Type: Non Latching matches the requirement.
✅ Termination Style: PC Pin matches the requirement.
✅ Operating Temperature: -40°C to 105°C exceeds the required -40°C to +85°C range.
✅ Approval Agency: cULus is equivalent to the required cURus or equivalent approval.
All required specifications are satisfied. This relay is approved for the stated application.
Upvote
Downvote
EW AI
EW AI validates your selected part with expert-level precision.
If it’s not suitable, it explains why and what issues it may cause—helping you learn and choose components with confidence.