39. Battery Mini-Breaker for Smartphone Battery Protection
Back To All Submissions
Previous Submission
Next Submission
MHP-TAM6-9-77
| DigiKey Part No | MHP-TAM6-9-77-ND |
| Mfr Part No | MHP-TAM6-9-77 |
| Manufacturer | Littelfuse Inc. |
THERMOSTAT 77DEG C SPST-NC STRAP
Thermal Cutoff (TCO) AC DC 12 A 77°C (171°F) Nonstandard
Powered by
EW
Response By EW AI
✅ Manufacturer: Littelfuse Inc. matches the AVL requirement.
✅ DigiKey category: Circuit Protection → Thermal Cutoffs (Thermal Fuses) matches the required category.
✅ Type: Breaker matches the required resettable battery mini-breaker type.
✅ Rated Functioning Temperature: 77°C matches the exact required trip temperature.
✅ Voltage Rating - DC: 9.0 V satisfies the requirement of ≥9.0 V and is suitable for a single Li-ion cell.
✅ Current Rating: 12 A is within the required 6 A to 12 A range. It is acceptable, though less sensitive for overcurrent protection than a 6 A version.
✅ Part Status: Active matches the requirement.
✅ RoHS Compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied, so this Littelfuse MHP-TAM6-9-77 is approved for the stated battery protection application.
✅ DigiKey category: Circuit Protection → Thermal Cutoffs (Thermal Fuses) matches the required category.
✅ Type: Breaker matches the required resettable battery mini-breaker type.
✅ Rated Functioning Temperature: 77°C matches the exact required trip temperature.
✅ Voltage Rating - DC: 9.0 V satisfies the requirement of ≥9.0 V and is suitable for a single Li-ion cell.
✅ Current Rating: 12 A is within the required 6 A to 12 A range. It is acceptable, though less sensitive for overcurrent protection than a 6 A version.
✅ Part Status: Active matches the requirement.
✅ RoHS Compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied, so this Littelfuse MHP-TAM6-9-77 is approved for the stated battery protection application.
Was this helpful?
Upvote
Downvote