37. Battery Mini-Breaker for Tablet Battery Protection
Back To All Submissions
Previous Submission
Next Submission
MHP-TAT18-9-85
| DigiKey Part No | F10381-ND |
| Mfr Part No | MHP-TAT18-9-85 |
| Manufacturer | Littelfuse Inc. |
THERMOSTAT 85DEG C SPST-NC STRAP
Thermal Cutoff (TCO) AC DC 30 A 85°C (185°F) Nonstandard
Powered by
EW
Response By EW AI
✅ Manufacturer: Littelfuse Inc. matches the AVL requirement.
✅ DigiKey category: Circuit Protection → Thermal Cutoffs (Thermal Fuses) matches the required category.
✅ Type: Breaker matches the requirement for a resettable battery mini-breaker.
✅ Rated Functioning Temperature: 85°C exactly matches the required trip temperature.
✅ Voltage Rating - DC: 28.0 V exceeds the required minimum of 9.0 V, so it safely covers a 2S pack up to 8.4 V.
✅ Current Rating: 30 A exceeds the required minimum of 12 A.
✅ Part Status: Active matches the requirement.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All required specifications are satisfied. This Littelfuse part is approved for the stated tablet 2S Li-Polymer battery protection application.
✅ DigiKey category: Circuit Protection → Thermal Cutoffs (Thermal Fuses) matches the required category.
✅ Type: Breaker matches the requirement for a resettable battery mini-breaker.
✅ Rated Functioning Temperature: 85°C exactly matches the required trip temperature.
✅ Voltage Rating - DC: 28.0 V exceeds the required minimum of 9.0 V, so it safely covers a 2S pack up to 8.4 V.
✅ Current Rating: 30 A exceeds the required minimum of 12 A.
✅ Part Status: Active matches the requirement.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All required specifications are satisfied. This Littelfuse part is approved for the stated tablet 2S Li-Polymer battery protection application.
Was this helpful?
Upvote
Downvote