55. DC Motor Relay Selection

✅ Relay Type: General Purpose matches the requirement.

✅ Mounting Type: Through Hole matches the PCB relay requirement.

✅ Coil Voltage: 12VDC matches the required coil voltage.

✅ Contact Form: SPST-NO (1 Form A) is acceptable because only normally open switching is needed.

✅ Contact Rating: 5A meets the minimum required ≥5A and is suitable for a 3A motor load.

✅ Switching Voltage: Rated for up to 30VDC, which is suitable for switching a 12VDC motor load.

✅ Coil Type: Non Latching matches the requirement.

✅ Termination Style: PC Pin matches the requirement.

✅ Operating Temperature: -40°C to 85°C matches the required range.

✅ Approval Agency: cURuus is equivalent to the required cURus or equivalent approval.

All listed requirements are satisfied. This relay is approved for the stated 12V DC motor PCB switching application.