55. DC Motor Relay Selection
Back To All Submissions
Previous Submission
Next Submission
Z219-ND
| DigiKey Part No | Z219-ND |
| Mfr Part No | G5Q-1A DC12 |
| Manufacturer | Omron Electronics Inc-EMC Div |
RELAY GEN PURPOSE SPST 10A 12V
General Purpose Relay SPST-NO (1 Form A) 12VDC Coil Through Hole
Powered by
EW
Response By EW AI
✅ Relay Type: General Purpose matches the requirement.
✅ Mounting Type: Through Hole matches the PCB relay requirement.
✅ Coil Voltage: 12VDC matches exactly.
✅ Contact Form: SPST-NO (1 Form A) is acceptable because only normally open switching is needed.
✅ Contact Rating: 10A exceeds the required minimum of 5A and is suitable for a 3A motor load.
✅ Switching Voltage: Rated up to 30VDC max, which is suitable for switching a 12VDC motor load.
✅ Coil Type: Non Latching matches the requirement.
✅ Termination Style: PC Pin matches the requirement.
✅ Operating Temperature: -40°C to 105°C exceeds the required -40°C to +85°C range.
✅ Approval Agency: UR is listed, which satisfies the cURus or equivalent requirement.
All required specifications are satisfied. This relay is approved for the stated 12V DC motor PCB switching application.
✅ Mounting Type: Through Hole matches the PCB relay requirement.
✅ Coil Voltage: 12VDC matches exactly.
✅ Contact Form: SPST-NO (1 Form A) is acceptable because only normally open switching is needed.
✅ Contact Rating: 10A exceeds the required minimum of 5A and is suitable for a 3A motor load.
✅ Switching Voltage: Rated up to 30VDC max, which is suitable for switching a 12VDC motor load.
✅ Coil Type: Non Latching matches the requirement.
✅ Termination Style: PC Pin matches the requirement.
✅ Operating Temperature: -40°C to 105°C exceeds the required -40°C to +85°C range.
✅ Approval Agency: UR is listed, which satisfies the cURus or equivalent requirement.
All required specifications are satisfied. This relay is approved for the stated 12V DC motor PCB switching application.
Was this helpful?
Upvote
Downvote