59. DC SSR Load Switching

✅ Relay Type: Photo-Coupled Relay (Photorelay), which matches the required solid state relay type.
✅ Circuit: SPST-NO (1 Form A), exactly as required.
✅ Output Type: DC, suitable for switching a 24V DC load.
✅ Voltage - Input: 4 ~ 30VDC, so it supports a 5V control signal.
✅ Voltage - Load: 0 ~ 60V, which satisfies the requirement for at least 24VDC load switching.
✅ Load Current: 3.6A, exceeding the minimum required 3A.
✅ On-State Resistance (Max): 90mΩ, which is below the maximum allowed 100mΩ for efficient operation.
✅ Mounting Type: Through Hole, which is an acceptable mounting option.
✅ Operating Temperature: -40°C ~ 85°C, matching the required range.
✅ Approval Agency: UR, VDE. VDE is an equivalent recognized safety approval to the required CSA, TUV, UL or equivalent.

All required specifications are satisfied. This component is approved for the 24V DC SSR load switching application.