59. DC SSR Load Switching

✅ Relay Type: Photo-Coupled Relay (Photorelay), which matches the required solid state relay type.

✅ Circuit: SPST-NO (1 Form A), exactly matches the requirement.

✅ Output Type: DC, suitable for switching a 24V DC load.

✅ Voltage - Input: 4 ~ 30VDC, so a 5V control signal is supported.

✅ Voltage - Load: 0 ~ 60V, which satisfies the requirement for at least 24VDC load capability.

✅ Load Current: 3.6A, exceeding the minimum required 3A.

✅ On-State Resistance (Max): 90 mOhms, which is below the maximum allowed 100 mOhms for efficient switching.

✅ Mounting Type: Through Hole, which is an allowed mounting option.

✅ Operating Temperature: -40°C to 85°C, matching the required range.

✅ Approval Agency: UR, VDE. VDE is an equivalent recognized approval agency to the required CSA, TUV, UL or equivalent.

This component satisfies all listed requirements for 24V DC solid state load switching and is approved.