59. DC SSR Load Switching
Back To All Submissions
Previous Submission
Next Submission
AQZ102D
| DigiKey Part No | AQZ102D-ND |
| Mfr Part No | AQZ102D |
| Manufacturer | Panasonic Electric Works |
SSR RELAY SPST-NO 3.6A 0-60V
Solid State Photo-Coupled Relay (Photorelay) SPST-NO (1 Form A) 4-SIP
Powered by
EW
Response By EW AI
✅ Relay Type: Photo-Coupled Relay (Photorelay), which satisfies the required solid state relay type.
✅ Circuit: SPST-NO (1 Form A), matches exactly.
✅ Output Type: DC, matches the required DC load switching application.
✅ Voltage - Input: 4 ~ 30VDC, so a 5V control signal is supported.
✅ Voltage - Load: 0 ~ 60V, which safely covers 24VDC load switching.
✅ Load Current: 3.6A, exceeding the required minimum of 3A.
✅ On-State Resistance (Max): 90 mOhms, which is within the required maximum of 100 mOhms for efficient operation.
✅ Mounting Type: Through Hole, which is an allowed mounting option.
✅ Operating Temperature: -40°C ~ 85°C, matches the required range.
✅ Approval Agency: UR, VDE. VDE is an equivalent safety approval to the requested agencies.
All required specifications are satisfied, so this component is approved for the 24V DC SSR load switching task.
✅ Circuit: SPST-NO (1 Form A), matches exactly.
✅ Output Type: DC, matches the required DC load switching application.
✅ Voltage - Input: 4 ~ 30VDC, so a 5V control signal is supported.
✅ Voltage - Load: 0 ~ 60V, which safely covers 24VDC load switching.
✅ Load Current: 3.6A, exceeding the required minimum of 3A.
✅ On-State Resistance (Max): 90 mOhms, which is within the required maximum of 100 mOhms for efficient operation.
✅ Mounting Type: Through Hole, which is an allowed mounting option.
✅ Operating Temperature: -40°C ~ 85°C, matches the required range.
✅ Approval Agency: UR, VDE. VDE is an equivalent safety approval to the requested agencies.
All required specifications are satisfied, so this component is approved for the 24V DC SSR load switching task.
Was this helpful?
Upvote
Downvote