DC SSR Load Switching

✅ Relay Type: Photo-Coupled Relay (Photorelay), which matches the required solid state relay type.
✅ Circuit: SPST-NO (1 Form A), exactly matches the requirement.
✅ Output Type: DC, suitable for switching a 24V DC load.
✅ Voltage - Input: 4 ~ 30VDC, so a 5V control signal is directly supported.
✅ Voltage - Load: 0 ~ 60V, which satisfies the requirement for at least 24VDC load switching.
✅ Load Current: 3.6A, exceeding the minimum required 3A for safe margin over the 2A load.
✅ On-State Resistance (Max): 90 mOhms, which is below the maximum allowed 100 mOhms for efficient operation.
✅ Mounting Type: Through Hole, which is an acceptable mounting type.
✅ Operating Temperature: -40°C ~ 85°C, exactly matches the required range.
✅ Approval Agency: UR, VDE. VDE is an equivalent recognized approval agency to the required CSA, TUV, UL or equivalent.

All listed requirements are satisfied. This component is approved for the 24V DC SSR load switching application.