DC SSR Load Switching

✅ Relay Type: Photo-Coupled Relay (Photorelay), which matches the required solid state relay type.
✅ Circuit: SPST-NO (1 Form A), exactly matches the requirement.
✅ Output Type: AC, DC; this includes DC output, so it is suitable for switching a 24V DC load.
✅ Voltage - Input: 1.14VDC. This is suitable for a 5V control signal because the required criterion is suitability for 5V control, and a lower input drive requirement is acceptable.
✅ Voltage - Load: 0 to 50V, which satisfies the requirement for at least 24VDC load capability.
✅ Load Current: 3A, which meets the minimum required 3A rating.
✅ On-State Resistance (Max): 70 mOhms, which is below the maximum allowed 100 mOhms and supports efficient switching with lower conduction loss.
✅ Mounting Type: Surface Mount, which is an allowed mounting type.
✅ Operating Temperature: -40°C to 85°C, exactly matches the required range.
✅ Approval Agency: UR, which is an acceptable equivalent approval marking to the requested CSA, TUV, UL or equivalent.

All required specifications are satisfied. This component is approved for the 24V DC SSR load switching application.