28. Divide-by-4 Tick Generator

How do you plan to solve it?

module tick_div4(
  input  wire clk,
  input  wire rst,
  output reg  tick
);
  reg [1:0] cnt;
  always @(posedge clk) begin
    // Write your code here
    if (rst) begin
      cnt <= 0;
      tick <= 0;
    end else begin
      if (cnt == 2'b11) begin
        tick <= 1'b1;
        cnt <= 0;
      end else begin
        tick <= 0;
        cnt <= cnt + 1;
      end
    end
  end
endmodule