57. DPDT Relay for Motor Direction Control
Back To All Submissions
Previous Submission
Next Submission
J114AF2CS12VDC.53
| DigiKey Part No | 2449-J114AF2CS12VDC.53-ND |
| Mfr Part No | J114AF2CS12VDC.53 |
| Manufacturer | CIT Relay and Switch |
RELAY GEN PURPOSE DPDT 8A 12V
General Purpose Relay DPDT (2 Form C) 12VDC Coil Through Hole
Powered by
EW
Response By EW AI
✅ Relay Type: General Purpose, matches the requirement.
✅ Mounting Type: Through Hole, matches the requirement.
✅ Coil Voltage: 12VDC, matches the requirement.
✅ Contact Form: DPDT (2 Form C), matches the requirement for motor polarity reversal.
✅ Contact Rating: 8A, which exceeds the required minimum of 5A and provides margin over the 2A motor load.
✅ Switching Voltage: 110VDC max, which is suitable for switching a 12VDC motor load.
✅ Coil Type: Non Latching, matches the requirement.
✅ Termination Style: PC Pin, matches the requirement.
✅ Operating Temperature: -55°C to 105°C, which is wider than the required -40°C to +85°C.
✅ Approval Agency: cURus, matches the requirement.
All required specifications are satisfied. This relay is suitable for 12V DC motor direction control and is approved.
✅ Mounting Type: Through Hole, matches the requirement.
✅ Coil Voltage: 12VDC, matches the requirement.
✅ Contact Form: DPDT (2 Form C), matches the requirement for motor polarity reversal.
✅ Contact Rating: 8A, which exceeds the required minimum of 5A and provides margin over the 2A motor load.
✅ Switching Voltage: 110VDC max, which is suitable for switching a 12VDC motor load.
✅ Coil Type: Non Latching, matches the requirement.
✅ Termination Style: PC Pin, matches the requirement.
✅ Operating Temperature: -55°C to 105°C, which is wider than the required -40°C to +85°C.
✅ Approval Agency: cURus, matches the requirement.
All required specifications are satisfied. This relay is suitable for 12V DC motor direction control and is approved.
Was this helpful?
Upvote
Downvote