44. GDT for Ethernet Port Lightning Protection
Back To All Submissions
Previous Submission
Next Submission
CG75MSTR
| DigiKey Part No | CG75MSTRTR-ND |
| Mfr Part No | CG75MSTR |
| Manufacturer | Littelfuse Inc. |
GDT 75V 20KA 2 POLE SMD
Gas Discharge Tube 75 V 20000A (20kA) 2 Pole Surface Mount
Powered by
EW
Response By EW AI
✅ Component type/category matches: Gas Discharge Tube (GDT) in DigiKey category Gas Discharge Tube Arresters (GDT).
✅ Manufacturer matches AVL requirement: Littelfuse Inc.
✅ Voltage - DC Spark Over (Nom): 75 V, exactly matches the required 75 V for PoE Ethernet surge protection.
✅ Impulse Discharge Current (8/20µs): 20000A (20kA), which exceeds the minimum required 10kA.
✅ Number of Poles: 2, matches the required 2-pole GDT for one Ethernet cable pair.
✅ Mounting Type: Surface Mount, matches the required SMD package.
✅ RoHS Compliance: ROHS3 Compliant, satisfies the RoHS requirement.
✅ Package description confirms SMD form: 2-SMD Cylinder Square End.
All required specifications are satisfied, so this Littelfuse part CG75MSTR is approved for the stated Ethernet port primary lightning surge protection application.
✅ Manufacturer matches AVL requirement: Littelfuse Inc.
✅ Voltage - DC Spark Over (Nom): 75 V, exactly matches the required 75 V for PoE Ethernet surge protection.
✅ Impulse Discharge Current (8/20µs): 20000A (20kA), which exceeds the minimum required 10kA.
✅ Number of Poles: 2, matches the required 2-pole GDT for one Ethernet cable pair.
✅ Mounting Type: Surface Mount, matches the required SMD package.
✅ RoHS Compliance: ROHS3 Compliant, satisfies the RoHS requirement.
✅ Package description confirms SMD form: 2-SMD Cylinder Square End.
All required specifications are satisfied, so this Littelfuse part CG75MSTR is approved for the stated Ethernet port primary lightning surge protection application.
Was this helpful?
Upvote
Downvote