20. Input EMI Filter Inductor
Back To All Submissions
Previous Submission
Next Submission
CSBA1050-100M
| DigiKey Part No | 4044-CSBA1050-100MTR-ND |
| Mfr Part No | CSBA1050-100M |
| Manufacturer | CODACA |
FIXED IND 10UH 7A 20 MOHM SMD
10 µH Shielded Wirewound Inductor 7 A 20mOhm Max 2-SMD Low DCR, Low Loss, Soft Saturation
Powered by
EW
Response By EW AI
✅ Inductance: 10µH matches the required 10µH.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 7A exceeds the required ≥2A, providing ample current handling margin.
✅ Saturation current: 8.4A exceeds the required ≥2.5A, helping prevent inductance collapse under load or transients.
✅ DC resistance: 20mΩ max is well below the required ≤100mΩ, minimizing voltage drop and power loss.
✅ Type: Shielded wirewound matches the required shielded wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to 150°C is wider than the required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the 24V input LC EMI filter application.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 7A exceeds the required ≥2A, providing ample current handling margin.
✅ Saturation current: 8.4A exceeds the required ≥2.5A, helping prevent inductance collapse under load or transients.
✅ DC resistance: 20mΩ max is well below the required ≤100mΩ, minimizing voltage drop and power loss.
✅ Type: Shielded wirewound matches the required shielded wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to 150°C is wider than the required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the 24V input LC EMI filter application.
Was this helpful?
Upvote
Downvote