30. TVS Diode for RS-485 Communication Bus Protection
Back To All Submissions
Previous Submission
Next Submission
SPHV15-01ETG-C
| DigiKey Part No | F6507TR-ND |
| Mfr Part No | SPHV15-01ETG-C |
| Manufacturer | Littelfuse Inc. |
TVS DIODE 15VWM 30VC SOD882
30V Clamp 5A (8/20µs) Ipp Tvs Diode Surface Mount SOD-882
Powered by
EW
Response By EW AI
✅ Manufacturer: Littelfuse Inc., which satisfies the AVL requirement.
✅ Component type/category: TVS diode in DigiKey Circuit Protection → Transient Voltage Suppressors (TVS) → TVS Diodes.
✅ Bidirectional Channels: 1, matching the requirement for RS-485 line protection.
✅ Voltage - Reverse Standoff (Typ): 15V, within the required 12V to 15V range.
✅ Voltage - Clamping (Max) @ Ipp: 30V, meeting the maximum allowed clamping voltage of 30V.
✅ Power - Peak Pulse: 200W, meeting the minimum requirement of 200W.
✅ Capacitance @ Frequency: 24pF @ 1MHz, which is below the 50pF maximum.
✅ Mounting Type: Surface Mount, as required.
✅ Package / Case: SOD-882, exactly matching the required package.
✅ Operating Temperature: -40°C to 125°C, matching the required industrial temperature range.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All listed requirements are satisfied, so this component is approved for the RS-485 bus protection application.
✅ Component type/category: TVS diode in DigiKey Circuit Protection → Transient Voltage Suppressors (TVS) → TVS Diodes.
✅ Bidirectional Channels: 1, matching the requirement for RS-485 line protection.
✅ Voltage - Reverse Standoff (Typ): 15V, within the required 12V to 15V range.
✅ Voltage - Clamping (Max) @ Ipp: 30V, meeting the maximum allowed clamping voltage of 30V.
✅ Power - Peak Pulse: 200W, meeting the minimum requirement of 200W.
✅ Capacitance @ Frequency: 24pF @ 1MHz, which is below the 50pF maximum.
✅ Mounting Type: Surface Mount, as required.
✅ Package / Case: SOD-882, exactly matching the required package.
✅ Operating Temperature: -40°C to 125°C, matching the required industrial temperature range.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All listed requirements are satisfied, so this component is approved for the RS-485 bus protection application.
Was this helpful?
Upvote
Downvote