28. TVS Diode for USB Data Line ESD Protection
Back To All Submissions
Previous Submission
Next Submission
F9321TR-ND
| DigiKey Part No | F9321TR-ND |
| Mfr Part No | AQ3045-01ETG |
| Manufacturer | Littelfuse Inc. |
TVS DIODE 5.3VWM 12VC SOD882
12V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount SOD-882
Powered by
EW
Response By EW AI
✅ Component type/category matches: TVS diode in DigiKey category Circuit Protection → Transient Voltage Suppressors (TVS) → TVS Diodes.
✅ Manufacturer matches AVL requirement: Littelfuse Inc.
✅ Application is suitable: listed for HDMI, USB, appropriate for USB D+/D− ESD protection.
✅ Bidirectional channels: 1.
✅ Reverse standoff voltage: 5.3V, within required 5V to 6.5V range.
✅ Clamping voltage: 12V, which satisfies the ≤17V requirement.
✅ Peak pulse power: 40W, meeting the ≥40W requirement.
✅ Capacitance: 0.35pF @ 1MHz, well below the ≤5pF limit for USB signal integrity.
✅ Mounting type: Surface Mount.
✅ Package / case: SOD-882.
✅ Operating temperature: -55°C to 150°C, wider than required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant.
All required specifications are satisfied. This Littelfuse part is approved for the USB data-line ESD protection task.
✅ Manufacturer matches AVL requirement: Littelfuse Inc.
✅ Application is suitable: listed for HDMI, USB, appropriate for USB D+/D− ESD protection.
✅ Bidirectional channels: 1.
✅ Reverse standoff voltage: 5.3V, within required 5V to 6.5V range.
✅ Clamping voltage: 12V, which satisfies the ≤17V requirement.
✅ Peak pulse power: 40W, meeting the ≥40W requirement.
✅ Capacitance: 0.35pF @ 1MHz, well below the ≤5pF limit for USB signal integrity.
✅ Mounting type: Surface Mount.
✅ Package / case: SOD-882.
✅ Operating temperature: -55°C to 150°C, wider than required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant.
All required specifications are satisfied. This Littelfuse part is approved for the USB data-line ESD protection task.
Was this helpful?
Upvote
Downvote