58. AC SSR Heater Control

✅ Relay Type: Photo-coupled solid state relay, which satisfies the Solid State Relay requirement.

✅ Circuit: SPST-NO (1 Form A), matches exactly.

✅ Output Type: AC, Zero Cross, suitable for AC heater switching and frequent silent ON/OFF operation.

✅ Voltage - Input: 4 ~ 32VDC, so a 5VDC control signal is supported.

✅ Voltage - Load: 0 ~ 240V, suitable for switching 230VAC.

✅ Load Current: 12A, which exceeds the required minimum of 5A and comfortably covers the 3A heater load.

✅ Mounting Type: Chassis Mount, acceptable per requirement.

✅ Termination Style: Screw Terminal, acceptable per requirement.

✅ Operating Temperature: -40°C ~ 100°C, exceeds the required -40°C to +80°C range.

✅ Approval Agency: cURus, IEC, VDE, CE, UKCA; this satisfies the requirement for UL or equivalent approvals.

All listed requirements are satisfied. This component is approved for the 230VAC heater SSR control application.