38. Battery Mini-Breaker for Power Tool Battery Protection
Back To All Submissions
Previous Submission
Next Submission
MHP-TAT18-9-90N
| DigiKey Part No | MHP-TAT18-9-90N-ND |
| Mfr Part No | MHP-TAT18-9-90N |
| Manufacturer | Littelfuse Inc. |
THERMOSTAT 90DEG C SPST-NC STRAP
Thermal Cutoff (TCO) AC DC 30 A 90°C (194°F) Nonstandard
Powered by
EW
Response By EW AI
✅ Manufacturer: Littelfuse Inc. matches the AVL requirement.
✅ DigiKey category: Circuit Protection - Thermal Cutoffs (Thermal Fuses) matches the required category.
✅ Type: Breaker, which satisfies the resettable battery mini-breaker requirement.
✅ Rated Functioning Temperature: 90°C, exactly matches the required trip temperature.
✅ Voltage Rating - DC: 28.0V, which satisfies the minimum ≥28.0V requirement for the 5S Li-ion pack.
✅ Current Rating: 30A, which satisfies the minimum ≥30A requirement and provides margin above the 25A peak load.
✅ Part Status: Active, as required.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
This selected Littelfuse MHP-TAT18-9-90N satisfies all listed requirements and is approved for the stated battery mini-breaker application.
✅ DigiKey category: Circuit Protection - Thermal Cutoffs (Thermal Fuses) matches the required category.
✅ Type: Breaker, which satisfies the resettable battery mini-breaker requirement.
✅ Rated Functioning Temperature: 90°C, exactly matches the required trip temperature.
✅ Voltage Rating - DC: 28.0V, which satisfies the minimum ≥28.0V requirement for the 5S Li-ion pack.
✅ Current Rating: 30A, which satisfies the minimum ≥30A requirement and provides margin above the 25A peak load.
✅ Part Status: Active, as required.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
This selected Littelfuse MHP-TAT18-9-90N satisfies all listed requirements and is approved for the stated battery mini-breaker application.
Was this helpful?
Upvote
Downvote