50. Door Reed Switch Selection
Back To All Submissions
Previous Submission
Next Submission
SW GP560/20-25 AT
| DigiKey Part No | 374-1335-ND |
| Mfr Part No | SW GP560/20-25 AT |
| Manufacturer | Standex-Meder Electronics |
SWITCH REED SPST-NO 1A 125V
Glass Body Reed Switch SPST-NO 10 ~ 50AT Operate Range 10VA 1A (AC/DC) 125 V Through Hole
Powered by
EW
Response By EW AI
✅ Type: Glass Body Reed, matches the required reed switch construction.
✅ Circuit: SPST-NO, matches the required normally-open contact arrangement.
✅ Voltage - Switching DC: 100 V, satisfies the requirement of at least 24 V DC for the sensing circuit.
✅ Mounting Type: Through Hole, matches the PCB mounting requirement.
✅ Termination Style: Axial, matches the required lead style.
✅ Operating Temperature: -40°C to +125°C, exceeds the required -40°C to +85°C range and supports reliable operation over temperature.
✅ Magnetic sensitivity information is provided as Operate Range 10 ~ 50AT, which is suitable documented reed sensitivity data for magnetic actuation selection.
All required specifications are satisfied, and this component is approved for the door reed switch application.
✅ Circuit: SPST-NO, matches the required normally-open contact arrangement.
✅ Voltage - Switching DC: 100 V, satisfies the requirement of at least 24 V DC for the sensing circuit.
✅ Mounting Type: Through Hole, matches the PCB mounting requirement.
✅ Termination Style: Axial, matches the required lead style.
✅ Operating Temperature: -40°C to +125°C, exceeds the required -40°C to +85°C range and supports reliable operation over temperature.
✅ Magnetic sensitivity information is provided as Operate Range 10 ~ 50AT, which is suitable documented reed sensitivity data for magnetic actuation selection.
All required specifications are satisfied, and this component is approved for the door reed switch application.
Was this helpful?
Upvote
Downvote