50. Door Reed Switch Selection
Back To All Submissions
Previous Submission
Next Submission
374-ORD624/15-20AT-ND
| DigiKey Part No | 374-ORD624/15-20AT-ND |
| Mfr Part No | ORD 624/15-20 AT |
| Manufacturer | Standex-Meder Electronics |
SWITCH REED SPST-NO 500MA 150V
Glass Body Reed Switch SPST-NO 15 ~ 20AT Operate Range 500mA (AC/DC) 150 V Through Hole
Powered by
EW
Response By EW AI
✅ Type: Glass Body Reed matches the required glass body reed switch.
✅ Circuit: SPST-NO matches the required normally-open contact configuration.
✅ Operate Range: 15 ~ 20AT is within the required 10 ~ 20AT range, so the magnetic sensitivity is suitable.
✅ Voltage - Switching DC: 200 V exceeds the required minimum of 24 V DC, so it is suitable for a 24 V sensing circuit.
✅ Mounting Type: Through Hole matches the requirement.
✅ Termination Style: Axial matches the requirement.
✅ Operating Temperature: -40°C ~ 125°C is wider than the required -40°C to +85°C, supporting reliable operation over temperature.
All required specifications are satisfied, and the selected component is approved for the door reed switch application.
✅ Circuit: SPST-NO matches the required normally-open contact configuration.
✅ Operate Range: 15 ~ 20AT is within the required 10 ~ 20AT range, so the magnetic sensitivity is suitable.
✅ Voltage - Switching DC: 200 V exceeds the required minimum of 24 V DC, so it is suitable for a 24 V sensing circuit.
✅ Mounting Type: Through Hole matches the requirement.
✅ Termination Style: Axial matches the requirement.
✅ Operating Temperature: -40°C ~ 125°C is wider than the required -40°C to +85°C, supporting reliable operation over temperature.
All required specifications are satisfied, and the selected component is approved for the door reed switch application.
Was this helpful?
Upvote
Downvote