11. MCU Decoupling Capacitor Selection
Back To All Submissions
Previous Submission
Next Submission
C0603C104K3RACTU
| DigiKey Part No | 399-C0603C104K3RACTUTR-ND |
| Mfr Part No | C0603C104K3RACTU |
| Manufacturer | KEMET |
CAP CER 0.1UF 25V X7R 0603
0.1 µF ±10% 25V Ceramic Capacitor X7R 0603 (1608 Metric)
Powered by
EW
Response By EW AI
✅ Component type: Ceramic capacitor, suitable for local MCU decoupling.
✅ Application: Listed for bypass and decoupling, matching the intended use.
✅ Capacitance: 0.1 µF matches the required 0.1 µF.
✅ Tolerance: ±10% matches the required ±10% or tighter.
✅ Dielectric type: X7R matches the required X7R or better.
✅ Voltage rating: 25V exceeds the required ≥10V.
✅ Package: 0603 (1608 Metric) matches the required 0603.
✅ Mounting type: Surface Mount, MLCC matches the required Surface Mount.
✅ Operating temperature range: -55°C to +125°C matches the required range.
✅ RoHS compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All required specifications are satisfied. This component is approved for use as a local decoupling capacitor for a 3.3V MCU power pin.
✅ Application: Listed for bypass and decoupling, matching the intended use.
✅ Capacitance: 0.1 µF matches the required 0.1 µF.
✅ Tolerance: ±10% matches the required ±10% or tighter.
✅ Dielectric type: X7R matches the required X7R or better.
✅ Voltage rating: 25V exceeds the required ≥10V.
✅ Package: 0603 (1608 Metric) matches the required 0603.
✅ Mounting type: Surface Mount, MLCC matches the required Surface Mount.
✅ Operating temperature range: -55°C to +125°C matches the required range.
✅ RoHS compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All required specifications are satisfied. This component is approved for use as a local decoupling capacitor for a 3.3V MCU power pin.
Was this helpful?
Upvote
Downvote