MELF Resistor Selection
MMF25SBRD10K
Response by EW AI Bot
✅ Resistance: 10 kOhms matches the required 10kΩ.
✅ Tolerance: ±0.1% is tighter than the required ±0.5%.
✅ Power rating: 0.25W meets the minimum requirement of ≥0.25W.
✅ Package: MELF package is explicitly specified.
✅ Mounting type: The part is listed as Chip Resistor - Surface Mount, satisfying the Surface Mount requirement.
✅ Temperature coefficient: ±25ppm/°C is better than the required ±50ppm/°C.
✅ Operating temperature range: -55°C to 155°C exceeds the required -55°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant, satisfying the requirement.
All required specifications are satisfied. This component is approved for the precision voltage divider application.
✅ Tolerance: ±0.1% is tighter than the required ±0.5%.
✅ Power rating: 0.25W meets the minimum requirement of ≥0.25W.
✅ Package: MELF package is explicitly specified.
✅ Mounting type: The part is listed as Chip Resistor - Surface Mount, satisfying the Surface Mount requirement.
✅ Temperature coefficient: ±25ppm/°C is better than the required ±50ppm/°C.
✅ Operating temperature range: -55°C to 155°C exceeds the required -55°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant, satisfying the requirement.
All required specifications are satisfied. This component is approved for the precision voltage divider application.
Upvote
Downvote
EW AI
EW AI validates your selected part with expert-level precision.
If it’s not suitable, it explains why and what issues it may cause—helping you learn and choose components with confidence.