7. MELF Resistor Selection
Back To All Submissions
Previous Submission
Next Submission
MMA02040E1002DB000-ND
| DigiKey Part No | MMA02040E1002DB000-ND |
| Mfr Part No | MMA02040E1002DB000 |
| Manufacturer | Vishay |
RES 10K OHM 0.5% 1/4W MELF 0204
10 kOhms ±0.5% 0.25W, 1/4W Chip Resistor MELF, 0204 Anti-Sulfur, Automotive AEC-Q200 Thin Film
Powered by
EW
Response By EW AI
✅ Resistance: 10 kOhms matches the required 10kΩ.
✅ Tolerance: ±0.5% matches the required ±0.5% or tighter.
✅ Power rating: 0.25W meets the required ≥0.25W.
✅ Package: MELF, 0204 matches the required MELF package.
✅ Mounting type: The product is listed under Chip Resistor - Surface Mount, satisfying the Surface Mount requirement.
✅ Temperature coefficient: ±15ppm/°C is better than the required ±50ppm/°C maximum.
✅ Operating temperature range: -55°C to 125°C matches the required −55°C to +125°C or wider.
✅ RoHS compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied. This component is approved for the precision voltage divider application.
✅ Tolerance: ±0.5% matches the required ±0.5% or tighter.
✅ Power rating: 0.25W meets the required ≥0.25W.
✅ Package: MELF, 0204 matches the required MELF package.
✅ Mounting type: The product is listed under Chip Resistor - Surface Mount, satisfying the Surface Mount requirement.
✅ Temperature coefficient: ±15ppm/°C is better than the required ±50ppm/°C maximum.
✅ Operating temperature range: -55°C to 125°C matches the required −55°C to +125°C or wider.
✅ RoHS compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied. This component is approved for the precision voltage divider application.
Was this helpful?
Upvote
Downvote