74. N-Channel MOSFET for LED Strip PWM Driver
Back To All Submissions
Previous Submission
Next Submission
SL2302
| DigiKey Part No | 5399-SL2302TR-ND |
| Mfr Part No | SL2302 |
| Manufacturer | Shenzhen Slkormicro Semicon Co., Ltd. |
20V 3.5A 1W [email protected],2.8A 1.5V 1
N-Channel 20 V 2.8A (Ta) 400mW (Ta) Surface Mount SOT-23
Powered by
EW
Response By EW AI
✅ FET Type: N-Channel, matches requirement.
✅ Technology: MOSFET (Metal Oxide), matches requirement.
✅ Drain to Source Voltage (Vdss): 20V, meets the ≥20V requirement for 12V LED strip margin.
✅ Current - Continuous Drain (Id) @ 25°C: 2.8A, exceeds the ≥2A requirement and provides margin over the 1A load.
✅ Vgs(th) (Max): 1.2V, satisfies the ≤2.5V requirement for 3.3V gate-drive compatibility.
✅ Rds On (Max): 45mΩ @ 4.5V, well below the ≤200mΩ limit, supporting low conduction loss.
✅ Vgs (Max): ±12V, satisfies the ≥8V requirement.
✅ Power Dissipation (Max): 400mW, exceeds the ≥300mW requirement.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: TO-236-3, SC-59, SOT-23-3, includes required SOT-23-3 package.
✅ Operating Temperature: -55°C to +150°C, matches requirement.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All listed requirements are satisfied. This component is approved for the specified LED strip PWM low-side switching application.
✅ Technology: MOSFET (Metal Oxide), matches requirement.
✅ Drain to Source Voltage (Vdss): 20V, meets the ≥20V requirement for 12V LED strip margin.
✅ Current - Continuous Drain (Id) @ 25°C: 2.8A, exceeds the ≥2A requirement and provides margin over the 1A load.
✅ Vgs(th) (Max): 1.2V, satisfies the ≤2.5V requirement for 3.3V gate-drive compatibility.
✅ Rds On (Max): 45mΩ @ 4.5V, well below the ≤200mΩ limit, supporting low conduction loss.
✅ Vgs (Max): ±12V, satisfies the ≥8V requirement.
✅ Power Dissipation (Max): 400mW, exceeds the ≥300mW requirement.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: TO-236-3, SC-59, SOT-23-3, includes required SOT-23-3 package.
✅ Operating Temperature: -55°C to +150°C, matches requirement.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All listed requirements are satisfied. This component is approved for the specified LED strip PWM low-side switching application.
Was this helpful?
Upvote
Downvote