74. N-Channel MOSFET for LED Strip PWM Driver
Back To All Submissions
Previous Submission
Next Submission
G6N02L
| DigiKey Part No | 3141-G6N02LTR-ND |
| Mfr Part No | G6N02L |
| Manufacturer | Goford Semiconductor |
MOSFET N-CH 20V 6A SOT-23-3L
N-Channel 20 V 6A (Tc) 1W (Tc) Surface Mount SOT-23-3
Powered by
EW
Response By EW AI
✅ FET Type: N-Channel, matches requirement.
✅ Technology: MOSFET (Metal Oxide), matches requirement.
✅ Drain to Source Voltage (Vdss): 20V, meets the ≥20V requirement for 12V LED strip margin.
✅ Current - Continuous Drain (Id) @ 25°C: 6A (Tc), exceeds the ≥2A requirement and provides ample margin over 1A load current.
✅ Vgs(th) (Max): 900mV @ 250µA, satisfies the ≤2.5V requirement for logic-level drive compatibility.
✅ Rds On (Max): 11.3mΩ @ 3A, 4.5V, far below the ≤200mΩ limit, indicating very low conduction loss.
✅ Vgs (Max): ±12V, satisfies the ≥8V requirement.
✅ Power Dissipation (Max): 1W (Tc), exceeds the ≥300mW requirement.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: SOT-23-3 / TO-236-3, SC-59, SOT-23-3, satisfies the SOT-23-3 requirement.
✅ Operating Temperature: -55°C to 150°C, matches the required range.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All required specifications are satisfied. This component is approved for the stated LED strip PWM low-side switching application.
✅ Technology: MOSFET (Metal Oxide), matches requirement.
✅ Drain to Source Voltage (Vdss): 20V, meets the ≥20V requirement for 12V LED strip margin.
✅ Current - Continuous Drain (Id) @ 25°C: 6A (Tc), exceeds the ≥2A requirement and provides ample margin over 1A load current.
✅ Vgs(th) (Max): 900mV @ 250µA, satisfies the ≤2.5V requirement for logic-level drive compatibility.
✅ Rds On (Max): 11.3mΩ @ 3A, 4.5V, far below the ≤200mΩ limit, indicating very low conduction loss.
✅ Vgs (Max): ±12V, satisfies the ≥8V requirement.
✅ Power Dissipation (Max): 1W (Tc), exceeds the ≥300mW requirement.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: SOT-23-3 / TO-236-3, SC-59, SOT-23-3, satisfies the SOT-23-3 requirement.
✅ Operating Temperature: -55°C to 150°C, matches the required range.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All required specifications are satisfied. This component is approved for the stated LED strip PWM low-side switching application.
Was this helpful?
Upvote
Downvote