29. One Shot Pulse

How do you plan to solve it?

module rise_pulse(
  input  wire clk,
  input  wire rst,      // synchronous active-high reset
  input  wire sig_in,
  output reg  pulse
);
  reg prev;             // previous sampled value of sig_in

  always @(posedge clk) begin
    // Write your code here
        if (rst) begin
        prev  <= 1'b0;
        pulse <= 1'b0;
    end else begin
        pulse <= sig_in & ~prev;  // detect rising edge
        prev  <= sig_in;          // update history
    end
  end
endmodule