73. PNP Transistor for Sensor Module Power Control
Back To All Submissions
Previous Submission
Next Submission
MMBT3906LT1G
| DigiKey Part No | MMBT3906LT1GOSTR-ND |
| Mfr Part No | MMBT3906LT1G |
| Manufacturer | onsemi |
TRANS PNP 40V 0.2A SOT23-3
Bipolar (BJT) Transistor PNP 40 V 200 mA 250MHz 300 mW Surface Mount SOT-23-3 (TO-236)
Powered by
EW
Response By EW AI
✅ Transistor Type: PNP, matches the required PNP high-side switch application.
✅ Current - Collector (Ic) (Max): 200 mA, meets the required ≥200 mA and provides the requested margin over the 50 mA sensor load.
✅ Voltage - Collector Emitter Breakdown (Max): 40 V, exceeds the required ≥20 V.
✅ DC Current Gain (hFE) (Min): 100 @ 10 mA, 1 V, meets the required minimum ≥80.
✅ Vce Saturation (Max): 400 mV @ 5 mA, 50 mA, meets the required ≤400 mV and is specified at the target load current.
✅ Power - Max: 300 mW, exceeds the required ≥200 mW.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: TO-236-3, SC-59, SOT-23-3, acceptable SOT-23 variant and matches requirement.
✅ Operating Temperature: -55°C to 150°C (TJ), exceeds the required -40°C to +125°C or wider.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All required specifications are satisfied. This component is approved for the stated 5 V sensor high-side switching application.
✅ Current - Collector (Ic) (Max): 200 mA, meets the required ≥200 mA and provides the requested margin over the 50 mA sensor load.
✅ Voltage - Collector Emitter Breakdown (Max): 40 V, exceeds the required ≥20 V.
✅ DC Current Gain (hFE) (Min): 100 @ 10 mA, 1 V, meets the required minimum ≥80.
✅ Vce Saturation (Max): 400 mV @ 5 mA, 50 mA, meets the required ≤400 mV and is specified at the target load current.
✅ Power - Max: 300 mW, exceeds the required ≥200 mW.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: TO-236-3, SC-59, SOT-23-3, acceptable SOT-23 variant and matches requirement.
✅ Operating Temperature: -55°C to 150°C (TJ), exceeds the required -40°C to +125°C or wider.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All required specifications are satisfied. This component is approved for the stated 5 V sensor high-side switching application.
Was this helpful?
Upvote
Downvote