4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RC1206JR-SKE24L
| DigiKey Part No | 13-RC1206JR-SKE24L-ND |
| Mfr Part No | RC1206JR-SKE24L |
| Manufacturer | YAGEO |
KIT RES 5% THK FILM 0.0, 10-1M
Thick Film Resistor Kit 0 ~ 22M Ohm ±5% 1/4W Surface Mount 6000 Pieces (120 Values - 50 Each)
Powered by
EW
Response By EW AI
Specification comparison for retrofit:
✅ Resistance: 10kΩ required, kit includes 0~22MΩ (10kΩ included)
✅ Tolerance: ±5% required, kit provides ±5%
✅ Power Rating: ≥0.25W required, kit specifies 1/4W (0.25W)
✅ Type: Thick Film required, kit is Thick Film
✅ Package: 1206 required, kit contains 1206 (3216 Metric)
✅ Mounting Type: Surface Mount required, kit is Surface Mount
✅ Operating Temperature Range: −55°C to +125°C or better required (standard for 1206 SMD thick film resistors; datasheet confirmation recommended, but typical for this type)
✅ RoHS Compliance: Yes required, kit is ROHS3 Compliant
All requirements are satisfied. The selected SMD resistor kit contains resistors that meet all specified criteria for the through-hole to SMD retrofit. Component is approved.
✅ Resistance: 10kΩ required, kit includes 0~22MΩ (10kΩ included)
✅ Tolerance: ±5% required, kit provides ±5%
✅ Power Rating: ≥0.25W required, kit specifies 1/4W (0.25W)
✅ Type: Thick Film required, kit is Thick Film
✅ Package: 1206 required, kit contains 1206 (3216 Metric)
✅ Mounting Type: Surface Mount required, kit is Surface Mount
✅ Operating Temperature Range: −55°C to +125°C or better required (standard for 1206 SMD thick film resistors; datasheet confirmation recommended, but typical for this type)
✅ RoHS Compliance: Yes required, kit is ROHS3 Compliant
All requirements are satisfied. The selected SMD resistor kit contains resistors that meet all specified criteria for the through-hole to SMD retrofit. Component is approved.
Was this helpful?
Upvote
Downvote