4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RK73B2BRTTD103J
| DigiKey Part No | 2019-RK73B2BRTTD103JTR-ND |
| Mfr Part No | RK73B2BRTTD103J |
| Manufacturer | KOA Speer Electronics, Inc. |
RES 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film
Powered by
EW
Response By EW AI
Specification Match Analysis:
✅ Resistance: 10 kΩ required — 10 kΩ provided.
✅ Tolerance: ±5% required — ±5% provided.
✅ Power Rating: ≥0.25W required — 0.25W provided.
✅ Type: Thick Film required — Thick Film provided.
✅ Package: 1206 required — 1206 (3216 Metric) provided.
✅ Mounting Type: Surface Mount required — Surface Mount (SMD) provided.
✅ Operating Temperature Range: −55°C to +125°C or better required — −55°C to +125°C provided.
✅ RoHS Compliance: Yes required — RoHS3 Compliant provided.
All requirements are satisfied. The selected SMD resistor (KOA Speer RK73B2BRTTD103J) fully matches the required specifications for a 10kΩ through-hole to SMD retrofit.
Component is approved.
✅ Resistance: 10 kΩ required — 10 kΩ provided.
✅ Tolerance: ±5% required — ±5% provided.
✅ Power Rating: ≥0.25W required — 0.25W provided.
✅ Type: Thick Film required — Thick Film provided.
✅ Package: 1206 required — 1206 (3216 Metric) provided.
✅ Mounting Type: Surface Mount required — Surface Mount (SMD) provided.
✅ Operating Temperature Range: −55°C to +125°C or better required — −55°C to +125°C provided.
✅ RoHS Compliance: Yes required — RoHS3 Compliant provided.
All requirements are satisfied. The selected SMD resistor (KOA Speer RK73B2BRTTD103J) fully matches the required specifications for a 10kΩ through-hole to SMD retrofit.
Component is approved.
Was this helpful?
Upvote
Downvote