4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
CR1206-JW-103ELF
| DigiKey Part No | CR1206-JW-103ELFTR-ND |
| Mfr Part No | CR1206-JW-103ELF |
| Manufacturer | Bourns Inc. |
RES SMD 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification Comparison:
✅ Resistance: 10kΩ required, selected is 10kΩ
✅ Tolerance: ±5% required, selected is ±5%
✅ Power Rating: ≥0.25W required, selected is 0.25W
✅ Type: Thick Film required, selected is Thick Film
✅ Package Size: 1206 required, selected is 1206 (3.20mm x 1.60mm)
✅ Mounting Type: Surface Mount required, selected is SMD
✅ Operating Temperature Range: −55°C to +125°C or better required, selected is −55°C ~ +155°C (meets and exceeds requirement)
✅ RoHS Compliance: Yes required, selected is ROHS3 Compliant
Conclusion:
All requirements are satisfied. The selected Bourns CR1206-JW-103ELF SMD resistor is an approved replacement for the specified through-hole resistor.
✅ Resistance: 10kΩ required, selected is 10kΩ
✅ Tolerance: ±5% required, selected is ±5%
✅ Power Rating: ≥0.25W required, selected is 0.25W
✅ Type: Thick Film required, selected is Thick Film
✅ Package Size: 1206 required, selected is 1206 (3.20mm x 1.60mm)
✅ Mounting Type: Surface Mount required, selected is SMD
✅ Operating Temperature Range: −55°C to +125°C or better required, selected is −55°C ~ +155°C (meets and exceeds requirement)
✅ RoHS Compliance: Yes required, selected is ROHS3 Compliant
Conclusion:
All requirements are satisfied. The selected Bourns CR1206-JW-103ELF SMD resistor is an approved replacement for the specified through-hole resistor.
Was this helpful?
Upvote
Downvote