4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RMCF1206FT10K0
| DigiKey Part No | RMCF1206FT10K0TR-ND |
| Mfr Part No | RMCF1206FT10K0 |
| Manufacturer | Stackpole Electronics Inc |
RES 10K OHM 1% 1/4W 1206
10 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Automotive AEC-Q200 Thick Film
Powered by
EW
Response By EW AI
Specification Comparison for SMD Resistor Selection
✅ Resistance: Required: 10kΩ, Selected: 10kΩ
✅ Tolerance: Required: ±5%, Selected: ±1% (tighter, acceptable)
✅ Power Rating: Required: ≥0.25W, Selected: 0.25W
✅ Type: Required: Thick Film, Selected: Thick Film
✅ Package: Required: 1206, Selected: 1206
✅ Mounting Type: Required: Surface Mount, Selected: Surface Mount
✅ Operating Temperature Range: Required: −55°C to +125°C or better, Selected: −55°C to +155°C (meets and exceeds requirement)
✅ RoHS Compliance: Required: Yes, Selected: ROHS3 Compliant
All requirements are satisfied. The selected component Stackpole RMCF1206FT10K0 is approved as a suitable replacement for the specified through-hole resistor in your SMD retrofit application.
✅ Resistance: Required: 10kΩ, Selected: 10kΩ
✅ Tolerance: Required: ±5%, Selected: ±1% (tighter, acceptable)
✅ Power Rating: Required: ≥0.25W, Selected: 0.25W
✅ Type: Required: Thick Film, Selected: Thick Film
✅ Package: Required: 1206, Selected: 1206
✅ Mounting Type: Required: Surface Mount, Selected: Surface Mount
✅ Operating Temperature Range: Required: −55°C to +125°C or better, Selected: −55°C to +155°C (meets and exceeds requirement)
✅ RoHS Compliance: Required: Yes, Selected: ROHS3 Compliant
All requirements are satisfied. The selected component Stackpole RMCF1206FT10K0 is approved as a suitable replacement for the specified through-hole resistor in your SMD retrofit application.
Was this helpful?
Upvote
Downvote