4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
541-10.0KFCT-ND
| DigiKey Part No | 541-10.0KFTR-ND |
| Mfr Part No | CRCW120610K0FKEA |
| Manufacturer | Vishay Dale |
RES SMD 10K OHM 1% 1/4W 1206
10 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Automotive AEC-Q200 Thick Film
Powered by
EW
Response By EW AI
Technical Evaluation of Selected SMD Resistor (Vishay Dale CRCW120610K0FKEA):
Specification Comparison:
✅ Resistance: 10 kΩ (matches required 10kΩ)
✅ Tolerance: ±1% (better than required ±5%)
✅ Power Rating: 0.25W (meets required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: -55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All specified requirements are satisfied or exceeded. The selected SMD resistor is fully approved as a replacement for the through-hole resistor in your retrofit application.
Specification Comparison:
✅ Resistance: 10 kΩ (matches required 10kΩ)
✅ Tolerance: ±1% (better than required ±5%)
✅ Power Rating: 0.25W (meets required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: -55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All specified requirements are satisfied or exceeded. The selected SMD resistor is fully approved as a replacement for the through-hole resistor in your retrofit application.
Was this helpful?
Upvote
Downvote