4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
CR1206-FX-1002ELF
| DigiKey Part No | CR1206-FX-1002ELFTR-ND |
| Mfr Part No | CR1206-FX-1002ELF |
| Manufacturer | Bourns Inc. |
RES SMD 10K OHM 1% 1/4W 1206
10 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification Comparison:
✅ Resistance: Required 10kΩ, Selected 10kΩ
✅ Tolerance: Required ±5%, Selected ±1% (tighter, acceptable)
✅ Power Rating: Required ≥0.25W, Selected 0.25W (1/4W)
✅ Type: Thick Film (matches)
✅ Package: 1206 (matches)
✅ Mounting Type: Surface Mount (matches)
✅ Operating Temperature Range: Required −55°C to +125°C or better, Selected −55°C to +155°C (better than required)
✅ RoHS Compliance: Required Yes, Selected ROHS3 Compliant
All requirements are satisfied, and the selected SMD resistor (Bourns CR1206-FX-1002ELF) is approved as a suitable replacement for the specified through-hole resistor.
✅ Resistance: Required 10kΩ, Selected 10kΩ
✅ Tolerance: Required ±5%, Selected ±1% (tighter, acceptable)
✅ Power Rating: Required ≥0.25W, Selected 0.25W (1/4W)
✅ Type: Thick Film (matches)
✅ Package: 1206 (matches)
✅ Mounting Type: Surface Mount (matches)
✅ Operating Temperature Range: Required −55°C to +125°C or better, Selected −55°C to +155°C (better than required)
✅ RoHS Compliance: Required Yes, Selected ROHS3 Compliant
All requirements are satisfied, and the selected SMD resistor (Bourns CR1206-FX-1002ELF) is approved as a suitable replacement for the specified through-hole resistor.
Was this helpful?
Upvote
Downvote