4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RC1206JR-0710KL
| DigiKey Part No | 311-10KERTR-ND |
| Mfr Part No | RC1206JR-0710KL |
| Manufacturer | YAGEO |
RES 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
✅ Resistance: 10 kΩ matches the required value.
✅ Tolerance: ±5% meets the requirement of ±5% or better.
✅ Power rating: 0.25 W (1/4 W) meets the minimum requirement of ≥0.25 W.
✅ Composition: Thick Film matches the required type.
✅ Package / Case: 1206 matches the required package.
✅ Mounting type: Surface Mount is satisfied by the chip resistor form factor.
✅ Operating temperature: -55°C to 155°C exceeds the required -55°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied. The component is approved for this retrofit application.
✅ Tolerance: ±5% meets the requirement of ±5% or better.
✅ Power rating: 0.25 W (1/4 W) meets the minimum requirement of ≥0.25 W.
✅ Composition: Thick Film matches the required type.
✅ Package / Case: 1206 matches the required package.
✅ Mounting type: Surface Mount is satisfied by the chip resistor form factor.
✅ Operating temperature: -55°C to 155°C exceeds the required -55°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied. The component is approved for this retrofit application.
Was this helpful?
Upvote
Downvote