4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RC1206DR-0710KL
| DigiKey Part No | 13-RC1206DR-0710KLTR-ND |
| Mfr Part No | RC1206DR-0710KL |
| Manufacturer | YAGEO |
RES 10K OHM 0.5% 1/4W 1206
10 kOhms ±0.5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification comparison for YAGEO RC1206DR-0710KL as a replacement:
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±0.5% (tighter than required ±5%)
✅ Power rating: 0.25W (meets required ≥0.25W)
✅ Type: Thick Film (matches required type)
✅ Package: 1206 (matches requirement)
✅ Mounting type: Surface Mount (matches requirement)
✅ Operating temperature range: −55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the component is approved as a suitable replacement.
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±0.5% (tighter than required ±5%)
✅ Power rating: 0.25W (meets required ≥0.25W)
✅ Type: Thick Film (matches required type)
✅ Package: 1206 (matches requirement)
✅ Mounting type: Surface Mount (matches requirement)
✅ Operating temperature range: −55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the component is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote