4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
311-10.0KFRCT-ND
| DigiKey Part No | 311-10.0KFRTR-ND |
| Mfr Part No | RC1206FR-0710KL |
| Manufacturer | YAGEO |
RES 10K OHM 1% 1/4W 1206
10 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification check:
✅ Resistance: Required 10kΩ, Part: 10kΩ
✅ Tolerance: Required ±5%, Part: ±1% (tighter tolerance is acceptable)
✅ Power Rating: Required ≥0.25W, Part: 0.25W
✅ Type: Required Thick Film, Part: Thick Film
✅ Package: Required 1206, Part: 1206
✅ Mounting Type: Required Surface Mount, Part: Surface Mount
✅ Operating Temperature Range: Required −55°C to +125°C or better, Part: −55°C to +155°C (meets and exceeds requirement)
✅ RoHS Compliance: Required Yes, Part: ROHS3 Compliant
All requirements are satisfied, and the selected SMD resistor is approved as a suitable replacement.
✅ Resistance: Required 10kΩ, Part: 10kΩ
✅ Tolerance: Required ±5%, Part: ±1% (tighter tolerance is acceptable)
✅ Power Rating: Required ≥0.25W, Part: 0.25W
✅ Type: Required Thick Film, Part: Thick Film
✅ Package: Required 1206, Part: 1206
✅ Mounting Type: Required Surface Mount, Part: Surface Mount
✅ Operating Temperature Range: Required −55°C to +125°C or better, Part: −55°C to +155°C (meets and exceeds requirement)
✅ RoHS Compliance: Required Yes, Part: ROHS3 Compliant
All requirements are satisfied, and the selected SMD resistor is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote